Find us on Google+

Buy John Guest Gas pumps G56 Flojet

Beer pump Flojet


Flojet G56 Gas Pump
Plastic Moulded Diaphragm Pump. FLOJET G56 AIR DRIVEN BEER PUMPS antoprene diaphragm‚ EPDM Valves Connections: - Fluid‚ 12.7mm (1/2") hose - Air‚ 6mm (1/4") hose Dimensions: - 116mm long‚ 82mm wide‚ 149mm high Output: - up to 26.5 litres/minute (5.9 gallons/minute). Maximum pressure 8.3bar (120psi) Capable of passing solids up to 3.2mm diameter Corrosion Resistant Sanitary Design Self-priming up to 4.5m Pump can run-dry and handle liquids up to 49ºC (120ºF) Max. Air Supply Pressure8.3bar (120psi)
The Flojet G56 Gas Pump has rapidly become the industry standard for use enhancing delivery in extended beer line systems.The Rugged Construction of the Flojet G56 gas Pump ensures a long life‚.The Flojet G56 gas Pump can be supplied with Push-Fit pipe sockets or serrated Hose Tail connections to Suit.Flojet G56 gas Pump may be powered by Compressed air‚ C02 or Nitrogen. Be sure to utilise the exhaust to air feature when using either C02 or Nitrogen in an enclosed environment.

Flojwet’s G56 Series beer pumps are designed for dispensing draught beer from a keg, cask or brew kettle through both long or short, vertical or horizontal line runs while maintaining the brewers recommended applied pressure on the beer. The gas pressure applied to the beer and the air/gas pressure applied to the pump, to move the beer from the vessel to the point of dispense, are completely separate.

Buy John Guest connectors for beer and soft drinks

John Guest Fittings for beer, wine,water, soft drinks and gas

We now stock a range of John Guest speed connectors in our shop.



John Guest beer fittings


The complete John Guest range of high quality push-in fittings, pipe and plastic plumbing systems to suit a wide variety of industries and applications such as drinks dispense, plumbing, pneumatics, compressed air systems, water purification and drinks vending.

John Guest push-in fittings are fast and reliable connection alternative over traditional compression and barb fittings when connecting two liquid lines. Simply cut the tubing square and insert it into the fitting.






Draught wine dispenser barrel

This wine barrel has been customised to dispense draught beers and wines direct from a keykeg. Not cas bottles are required and all of the cooling for it is built in. This is the first one in its early stages before being cleaned up. The top lifts off lifts off to access the keg and cooler unit inside... Seems to work quite well.




wine barrel tap

kegkeg dispenser