Find us on Google+

Different types of keg fittings

Which type of keg connector fitting do I need for my keg?
Below is a selection of the most commonly used keg connectors within the UK

Inbev keg connector
U-type keg connector fitting:
Usually used by Inbev and on the following products
Boddingtons, Stella, Leffe

Guinness keg connector
A-Type keg connector fitting:
Usually used by Guinness and on the following products
Hoegaarden, Guinness, Pimm's

grundy keg connector
G-Type (Grundy) keg connector fitting:
Used a lot by Coor's and on the following products
Beck's vier, Blackthorne, Caffrey's, Carling, Worthington,
 Grolsch, Budweiser, Stella 4%

Sankey keg connector
S-Type (Sankey) keg connector fitting:
The most commonly used keg connector in the UK
Used on a lot of Carlsber and Heineken products
Amstel, Carlsberg, Carlsberg Export, Foster's, John Smith's, Kronenbourg 1664,
Heineken, Marston's, Peroni, Pilsner Urquell, San Miguel, 
 Staropramen, Strongbow, Tetley's
Keykeg barrel fitting
Keykeg style keg connector fitting:
They look very similar to a G type (grundy)
They are different underneath and connect in a different way.
They are mainly used by craft beer breweries on many different products.

Keg connectors are available to buy in our store.

M type keg coupling
M-Type keg connector
Appears the same as an A-type but the probe on the under side is narrow and longer

This is just a guide and the breweries sometimes decide to change, so try and make sure you have the correct keg connector before you buy.

No comments:

Post a Comment